×close
×close
×close
In Stock
BT512624
Bolton Coupler for 689-2700 MHz 50 Ohm 15 dB
$79.95
with FREE SHIPPING
Point at the cool image of our stuff to zoom
In Stock
BT512624

Bolton Coupler for 689-2700 MHz 50 Ohm 15 dB

$79.95
with FREE SHIPPING

Bring out the big boys for your big job.

  • Splits the amplified signal with minimal loss
  • Works with 50 Ohm amplifiers and antennas
  • Controlled signal distribution to small and large areas
  • Ideal for long cable runs
  • Superb for active, hybrid, and passive DAS systems
Request a Quote
Pay With

This 15 dB Bolton coupler (or taps) is a handy little accessory used in larger projects – generally by professionals – to lay down antennas along a long cable run.

A Bolton Coupler (also called a Tap) is a wideband cellular accessory. Taps can be used to split the amplified signal for multiple inside antennas with minimum signal loss. They are designed to be used in setups where a smaller amount of signal is desired in one area and a larger amount in another – in other words, they are useful for dropping antennas at various intervals during a long cable run.


We offer three types of coupler: -6dB, -10dB, and –15dB. These are utilized in different ways.


This is a -15dB coupler. -15dB couplers have –15dB of loss at the point of the antenna drop but has even less insertion loss at –0.14dB. Your link budget for the overall cable run will only be marginally impacted by this coupler, but the –15dB of loss it gives to the antenna is more than other couplers.


Our couplers balance loss at the point of antenna drop with insertion loss to continue the run, so choose the variety of tap which is most helpful for optimizing your system.


Grab a copy of The Bolton Technical Product Catalog I Want One
Back To Top