High-Performing and Truly Customizable
This is LDF4-50A, HELIAX® spec Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket (Halogen free jacketing non-fire-retardant).
Our coaxial cable is of the highest possible quality and grade. LDF50 ½" cable has the lowest possible loss, with a maximum loss of only 2.17 dB for 100 ft at the 800 MHz band. See the complete specifications below for a complete listing of loss per frequency.
Bolton LDF50 Half-Inch coax is the best choice for long outdoor cable runs where price meets performance. It can handle 5G, 4G, and LTE cellular, WiFi, public safety, CBRS, and more. It can be attached to any 50 ohm system, be it a base station or cellular signal booster.
LDF4-50A, HELIAX® is a copyright of Commscope, Inc.
|Dielectric Material||Foam PE|
|Inner Conductor Material||Copper Clad aluminum wire|
|Outer conductor material||Corrugated copper||ELECTRICAL STUFF|
|Cable Impedance||50 ohm +- 1ohm|
|dc Resistance, Inner Conductor||4.826 mm | 0.19 in|
|dc Resistance, Outer Conductor||2.69 ohms/km | 0.820 ohms/kf||dc Test Voltage||4000 V|
|Insulation Resistance||100000 MOhms-km|
|Jacket Spark Test Voltage (rms)||8000 V|
|Operating Frequency Band||1 - 8800 V|
|Peak Power||40 kW|
|Diameter Over Jacket||15.748 mm | 0.62 in|
|Inner Conductor OD||4.572 mm | 0.18 in|
|Outer Conductor OD||14.046 mm | 0.553 in|
|Nominal Size||1/2 in|
|Minimum Bend Radius, multiple Bends||127 mm | 5 in|
|Minimum Bend Radius, Single Bend||63.5 mm | 2.5 in|